All Posts

The MITO METER 2.0 [EURO]  uses an 18-step colour LED Working Window to display EMF levels — with no confusing numbers to interpret. The first nine LEDs are aligned with EUROPAEM, TCO, the BioInitiative Report, and Building Biology  guidelines, so the colours reflect real-world biological relevance, not just signal strength. From left to right, 4 green → 3 yellow → 2 red  LEDs illuminate across RF, Magnetic, and Electric Field  modes, making it easy to see whether a space is

MITO METER 2.0 [EURO] Electromagnetic Field Meter User Manual (2026) Developed by EnviroSens & Blakes Electronics Integrators INTRO Introduction Important Notice Package Contents OPERATION Charging LiPo Battery Turning ON the Mito Meter Understanding the Readings Measurement Methods MODES RF Mode – Working Window LFM Mode – Working Window LFE Mode – Working Window Extended Modes RF-Xs Mode: Sound Signature  RF-X6 Mode: Six Minute Monitoring LFM-X Mode: PowerGrid Monitorin

Low-Frequency vs High-Frequency EMF Why one type of EMF is measured as one field and the other as two. RF MODE – Measurement Methods How to measure 4G/LTE/5G, Wi-Fi, Bluetooth & Wireless Radation LFM MODE – Measurement Methods What magnectic feilds you should be on the look out for. LFE MODE – Measurement Methods What electrical infrastructure, cabling and connected devices to measure. Low-Frequency vs High-Frequency EMF 3-in-1 EMF meters conveniently combine all the above m

Developed by EnviroSens and Blake's Electronic Integrators, the upgraded, custom-built Mito Meter 2.0 sets a new benchmark in the 3-in-1 EMF meter category, offering exceptional ease of use, compact design, and overall industry-leading sensitivity. Engineered as a simple yet sophisticated Building Biology pre- and post-screening tool, it is purpose-built to optimize EMF detection and protection for those on the move. The quick boot-up time, mode selector, bright-colored LED

If you can find a better 3-in-1 EMF meter than your custom built MITO METER 2.0 [EURO], more sensitive in all three modes, RF, Electric & Magnetic, we will refund your purchase and give you $1000.

What EMF levels are safe, and how many lights on my meter are bad? These are the two most asked questions. Some would say the short answer is that there are no safe non-native EMF levels, while others claim that non-ionising EMFs present no danger. One thing everyone can agree on is that natural background EMF levels aren’t just health-supportive — they’re vital for our survival.

Identify harmful, dynamic magnetic fields from the PowerGrid with built-in 12 hour record and playback.

The MITO METER 2.0 [EURO] is equipped with a Voltage Potential Contact Pad , designed to significantly improve sensitivity for low-frequency electric field (LFE Mode) detection. When using a standard low-frequency e-field detector, simply holding the meter  can increase sensitivity by up to four times compared to the conventional “hands-off” method of stepping back during measurements. Most 3-in-1 EMF meters under $500 struggle to detect electric fields below 10 V/m . The Mit

Last month, I purchased the Brother HL-L2400DW Laser Printer for just $159 (AUD), and it turned out to be a fantastic find for those concerned about EMF exposure. Unlike almost all other printers, this one has a functional Wi-Fi on/off button, allowing users to disable wireless signals completely when not needed. Even better, when I connect my ungrounded MacBook to a power outlet while using this printer, the MacBook becomes grounded, significantly reducing dirty electricity

Not many people read instructions or specifications — they never have and probably never will. So when people buy EMF meters, they often...

The most disruptive device under our roof? My teenage son’s AirPods. Even when they’re off and sitting in their charging case, they still...

Radio Frequency (Pulsed Microwave Radiation) limits by country are mainly established by regulatory agencies influenced by the wireless...